testing weld中文是什么意思

发音:

中文翻译
造句

试验焊缝

test n. 【动物；动物学】(软体类的)介壳，甲壳；【植物；植 ...
weld n. 【植物；植物学】淡黄木樨草；(由淡黄木樨草采取的) ...
ultrasonic testing of weld in piping 配管焊缝的超声波探伤
t weld t形焊接; 丁字接头焊缝
t-weld t形焊接
t-weld t 形焊接
weld n. 焊接(点)，熔接点。 vt. 焊[熔]接；使密切接合，结合。 A welded joint 【机械工程】熔接头。 vi. 被焊接[熔接]。 Welding powder 焊粉。 A welding rod 焊条。 Gas welding 气焊。 Resistance weld 电焊。 A weld-less pipe 无缝管。 n. -er 1.焊工。 2.焊接机。 -ing 焊接 (welding torch 熔焊炬)。 n. 【植物；植物学】淡黄木樨草；(由淡黄木樨草采取的)黄色染料。
weld into 结合
weld on 焊上
testing 测试系统; 吃力的; 复合地层试井; 检验的; 施测; 试验的; 试验方法; 试验设备
weld decay, weld corrosion 焊区腐蚀
all-weld 全焊接的
aluminithermic weld 铝剂焊接; 铝热焊接
angle weld 角焊; 角熔接
annealing weld 退火焊缝
annular weld 环状焊缝
appearance of weld 焊缝成形
arc weld 电弧熔接; 弧焊焊缝
arc-weld 电弧焊
around weld 周围焊缝
at weld edge 在焊缝边上
attachment weld 固定焊接; 连接焊缝
autogenous weld 乙炔焊
automatic weld 自动焊缝; 自动焊焊缝; 自动焊接
axis of a weld 焊缝中心线; 焊接轴线; 熔接轴

"查查词典"手机版

千万人都在用的超大词汇词典翻译APP

例句与用法

Welding procedure qualification based on tested welding consumables
基于试验焊接材料的工艺评定
Defects recognition based on support vector machine within radiographic testing weld
基于支持向量机的射线检测焊接图像中缺陷识别
Specification and qualification of welding procedures for metallic materials - qualification based on tested welding consumables
金属材料焊接程序的规范和认可.基于试验消耗品的认可
Specification and qualification of welding procedures for metallic materials - qualification based on tested welding consumables
金属材料焊接程序规范和合格鉴定.基于试验焊接消耗品的合格鉴定
Specification and qualification of welding procedures for metallic materials - qualification based on tested welding consumables iso 15610 : 2003 ; german version en iso 15610 : 2003
金属材料焊接过程的规范和合格鉴定.基于已试验过的焊
To validate the formulated transition element for the calculation of the hot - spot stress and stress concentration factor in the welded components by experimental results , the stress concentration factor of the experimental welded specimens carried out in the research group is calculated by using the developed plane - transition element . the calculated stress concentration factor in the two types of tested welding components agrees well with that obtained from the experimental result . and the calculated result on the tendency of hot - spot stresses agrees well with that from the measured result
为了验证文中构造的过渡单元模型用于分析焊接节点附近的应力集中问题的正确性和有效性，进一步又对过渡单元模型进行实验结果验证，采用平面过渡单元模型计算了本课题组进行的两类焊接构件的应力集中系数，并与根据实测方法得到的应力集中系数进行了比较，计算结果与实验测试得到的应力集中系数和相应的热点应力变化趋势比较吻合，为本文建立的过渡单元的实际应用提供了初步的基础。